Innovative-RC Front Big Bore Shocks V3 for the HPI Baja
 
After 18+ Months of testing we are pleased to release the Innovative-RC true Big Bore shocks for the HPI Baja 5B & 5T, Innovative-RC 'Big Bore' shocks are purposely built from the ground up using no HPI parts what so ever. Giving a true after market shock with many features over stock shocks...with full spares of every part available.
 
Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) & 6mm (VVC) shafts. no large shock shaft would be complete with full Umbrella/ Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also build other seals with in the shock bottom cap to stop and limit any dirt & sand entering into the shock seals and shock body which is main cause of leaks. so no expensive seal upgrades are needed.
 
Each shock Cap Contains a bleeder hole for easy quick assemble and bleeding of the shocks once filled with oil removing all air and excess oil quickly and efficiently. While the shock body has a fully adjustable unlimited potion adjust that screws up and down the length of the shock body giving that i deal shock spring set-up for any track or condition that might come up.
 
Each shocks Spring retainer is full housed on the shock shaft & rose joint meaning the retainer can no longer come loose meaning no more lost or loose spring retainers.
 
V3 Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.
 
Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.
 
.:Over View:
Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
V3 Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
V3 incldues spanner Flats on shock body for easy assembly now
V3 also has spanner flats on shock shafts
V3 also includes 3mm springs as standard
Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
2x Front Big Bore shocks - pre assembled.
2x Bottom rose joint balls for front mounting - pre installed.
2x top front shock mount pivots for Stock mounting (For other mounts please see option extra or contact us).
screws & hardware for mounting front shocks.
Pre install Umbrella/Oil seals for leak free and long life shock operation.
Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.
Same length as stock HPI Baja shocks, so direct fit.
 
.:Needed & recommended Parts:.
Shock Oil - 57ml (2oz) ~ fills two and half shocks.
Baja 5B 5T SS Rear Shock Brace - part# 87551
recommended - front shock braces for extra support - Innovative-RC or other. (TR fully comparable with TR top pivot stand-offs)
 
.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)
 
Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),
 
.: Review:.
Full Length Review and in-depth write up by the grate guys over at www.Baja-Forum.co.uk
http://www.baja-forum.co.uk/showthread.php?7422-Innovative-RC-Big-Bore-shocks-deeper-look-and-review
Innovative RC (IRC) BAJA V3 Big Bore Shocks - Front (silver)
£86.00Price
Quantity
ADD TO CART